www.makemkv.com

I have a few questions about writing data to M-DISC: After ripping the contents of a Blu-Ray disc to some folder called e.g. "Stargate_SG1_BR_S6D2" could I with the appropriate M-DISC drive write that folder to said M-DISC as a "Raw Backup" and have it be unencrypted? If the abo...

We advise you to use the UHD guide by Billycar11. https://forum.makemkv.com/forum/viewtopic.php?t=19634 I am running 1.02 with all three of my LGs (BP60 included). Four if you include my dead one. 1.01 on my Pioneer because it came with that FW. And my ASUS (x2) are on 3.10. You have to remember pe...

I sometimes do 3 discs at a time, but I've always put one disc in, wait for it to read the title, then move on to the next instance. That only takes a short amount of time for each disc unless the drive can't read the disc at all, which happens occasionally). Hello dcoke22, I would agree with your ...

Jman5150 wrote: ↑

Thu Jul 20, 2023 10:54 am

Ironic I was just reporting back, one drive died on me so I think it was messing with the others. I’ve been rotating around 5 different ones and till now its inconsistency made it hard to isolate. So problem fixed…

Good to hear

. I haven't used v1.02 on anything since sometime back in 2017. ahh now it all comes to light wh16ns60 1.02mk did not exist in 2017 that fw did not hit the streets until late 2018/early 2019 so you were using the wrong fw likely wh16ns40 1.02 Well Done Billy! You got to the bottom of the issue. Asm...

I got it working since but it’s had weird stalls for the last month takes like a half an hour to get the program to mount. It tried to reset my ver and over or takes forever in the first screen loading. Try just one drive and disconnect the other. Untick the multi drive option and see if you still ...

Since the last update it takes like 15 min for two disks to load up. It used to take like 30 sec or less each instance. Anything after 3 fails now. I even cleared out 40% of my drive thinking it was too full. Repaired, etc….tried everything. Anyone else having loading delays since the latest update...

Which firmware version are you running in which drive/s? I just ripped Pacific Rim Uprising 4K in my new WH16NS40 with 1.05 firmware, no problem at all. Then put that same disk into my old WH14NS40 with 1.04 firmware and it failed with read errors. So I updated that drive to v1.05 and tried again, ...

I didn't keep a log. I am just an end user, so why would I?? Could you please PM me the 100 discs that you stress tested my drive with? I am fairly skeptical there were many regular 1080p BD discs used! Which firmware version are you running in which drive/s? I just ripped Pacific Rim Uprising 4K i...

Version 1.03 https://pioneer.jp/cgi-bin/device/download/file_get_e2.pl?file=BDR-S12JBK_UHT_FW103EU.exe Change point : 1.03 - Improvement of the playback operation with specific media 1.02 - Improvement of the playback operation with specific media 1.01 - Support New BD-R TL media(4x Writing : RiTEK...

I didn't keep a log. I am just an end user, so why would I?? Could you please PM me the 100 discs that you stress tested my drive with? I am fairly skeptical there were many regular 1080p BD discs used! We are sorry you feel skeptical. They were all 4k UHD discs. Looks like you have a nice selectio...

I was looking at purchasing a Pioneer BDR-XS07UHD and wanted to know if it is compatible with MakeMKV for 4k Blu-Rays right out of the box. I would go for a BDR-XD07UHD but those are over £400 whilst the BDR-XS07UHD is just £210 and my goal is to spend as little as possible to get into ripping Blu-...

OP, I buy and rip a ton of discs still. Probably around 50/month. You'll keep hearing that Pioneer drives are the best. Which is true to an extent. They're also the most expensive (if you want quality) and the slowest. Well, I have finally figured out the problem with my Pioneer S12UHD. Although it...

Quick questions, but very specifically and 3 parts are required for one answer: P1. What is the best optical drive currently on the market here in 2023? What I mean specifically, which drive has the latest capabilities and all of them in one drive? P2. Does that drive have firmware available to act...

I just registered to detail my experiences with Asmcom. I bought a MakeMKV license some time ago, as I had decided to migrate my entire collection from *.iso to *.mkv (because there is nothing that can play *.iso files from a server, at least not to my standards). This was quite some endeavour, but...