New activation code till end of March 2015 doesn't work

Everything related to MakeMKV
Rustle
Posts: 2
Joined: Sun Feb 01, 2015 8:39 am

Re: New activation code till end of March 2015 doesn't work

Post by Rustle »

Confirming activation problems and work around works

I couldn't find the version.txt file that derschulmeister was talking about. I found other files that did say 1.9.1 within them, anyone else have ideas?
OllieB
Posts: 1
Joined: Sun Jun 15, 2014 12:55 pm

Re: New activation code till end of March 2015 doesn't work

Post by OllieB »

Just change your system date to Jan 29th, start MakeMKV and enter the license key posted a couple of messages ago. Restart MakeMKV and it works without a problem
nathan
Posts: 9
Joined: Fri May 16, 2014 9:22 am

Re: New activation code till end of March 2015 doesn't work

Post by nathan »

derschulmeister wrote:I found the following solution. In my user-directory (c:\user\%username%\makemkv\) i found the file dump_ID4_F2_265BD3EB651976A1.tgz. I opend this with 7zip. Then I found the file dump_ID4_F2_265BD3EB651976A1.tar and opend it also in 7zip. In this archive I found the file version.txt. I have installed makemkv version 1.9.1 but in the file version.txt was the version number still 1.8.13. After changing the the version number to 1.9.1 in texteditor and aktualisation of the archive-file was all ok. Best regards! Sorry forget it - using Windows 7.
Could not find this file, in that location I have MKB_v31_SWATH_G55.tgz, it seems to contain files relating to the optical drive.

Currently using the change date workaround. Made me smile to see that windows predicts I will have a previous version "Later this week" on 01/02/2015.
mattias83
Posts: 52
Joined: Fri Mar 21, 2014 9:44 am

Re: New activation code till end of March 2015 doesn't work

Post by mattias83 »

OllieB wrote:Just change your system date to Jan 29th, start MakeMKV and enter the license key posted a couple of messages ago. Restart MakeMKV and it works without a problem
I don't want to mess with my system sate - that will throw off other software I use.
mattias83
Posts: 52
Joined: Fri Mar 21, 2014 9:44 am

Re: New activation code till end of March 2015 doesn't work

Post by mattias83 »

derschulmeister wrote:I found the following solution. In my user-directory (c:\user\%username%\makemkv\) i found the file dump_ID4_F2_265BD3EB651976A1.tgz. I opend this with 7zip. Then I found the file dump_ID4_F2_265BD3EB651976A1.tar and opend it also in 7zip. In this archive I found the file version.txt. I have installed makemkv version 1.9.1 but in the file version.txt was the version number still 1.8.13. After changing the the version number to 1.9.1 in texteditor and aktualisation of the archive-file was all ok. Best regards! Sorry forget it - using Windows 7.
Okay, this is weird. I didn't change the date or anything. I just started it up today and now MakemKV works fine. I'm ripping a disc now.

Could it be the new key wasn't set to be active until the first of the month?

The only other thing I can think of is I ran ccleaner last night - could that have cleared out some temporary junk file that was causing the issue?
chuck666
Posts: 1
Joined: Sun Feb 01, 2015 5:02 pm

Re: New activation code till end of March 2015 doesn't work

Post by chuck666 »

I had to use the Jan 29 date change workaround today, Feb 1.
thedigitalhobo
Posts: 40
Joined: Thu Jun 13, 2013 1:49 am
Contact:

Re: New activation code till end of March 2015 doesn't work

Post by thedigitalhobo »

I upgraded to 1.9.1 this morning and its working fine.
No key required and says I'm good until April 21, 2015 (78 days)
Viseman
Posts: 2
Joined: Fri Jan 30, 2015 7:38 am

Re: New activation code till end of March 2015 doesn't work

Post by Viseman »

thedigitalhobo wrote:I upgraded to 1.9.1 this morning and its working fine.
No key required and says I'm good until April 21, 2015 (78 days)
Thats until this program works, it has nothing to do with the key.
ssizzl
Posts: 5
Joined: Thu Jan 08, 2015 9:06 pm

Re: New activation code till end of March 2015 doesn't work

Post by ssizzl »

I tried cclean and it didn't help. I have tried everything (other than changing the date) and it still doesn't work. I hope there is a fix for this. I had nightmares of it never working again LOL. However, one just needs to change the date until you restart makemkv. You can then change the date back while the disk gets backed up. Don't know what will happen after it finishes the current disk, but changing the date before every use is no big deal.
mrkeeling
Posts: 4
Joined: Sun Feb 01, 2015 7:46 pm

Re: New activation code till end of March 2015 doesn't work

Post by mrkeeling »

Confirming activation problems and work around works (changing system date).
ZeroGeek1979
Posts: 1
Joined: Mon Feb 02, 2015 2:52 pm

Re: New activation code till end of March 2015 doesn't work

Post by ZeroGeek1979 »

I am also having the same issue. Thank you for the date work around, as that did make the software start functioning again. Hopefully this is resolved soon!
sofakng
Posts: 62
Joined: Fri Mar 19, 2010 12:51 pm

Re: New activation code till end of March 2015 doesn't work

Post by sofakng »

This doesn't work for me. If I set the date to 1/29 then it works, but re-entering the key using the instructions doesn't work once I set the date back to the current date.
ssizzl
Posts: 5
Joined: Thu Jan 08, 2015 9:06 pm

Re: New activation code till end of March 2015 doesn't work

Post by ssizzl »

This what I did.
- Change date
- Start Makemkv
- enter key
- restart makemkv
- change date back
- Leave makemkv running or you must repeat above.
sparktank
Posts: 9
Joined: Sat Jan 21, 2012 11:55 am

Re: New activation code till end of March 2015 doesn't work

Post by sparktank »

So, aside from the aformentioned workaround, is there any news from Mike about what's going on?

Is it leaving Beta?
onthebeach
Posts: 6
Joined: Sun Feb 02, 2014 10:06 pm

Re: New activation code till end of March 2015 doesn't work

Post by onthebeach »

I was experiencing the same issue today. I remembered I had previously updated to 1.9.1 in January.

The workaround I successfully used:

1. I grabbed the previous version 1.9.0 from: /download/old/
2. Uninstalled 1.9.1
3. Installed 1.9.0
4. Registered the new key
5. Confirmed the package was working
6. Installed 1.9.1 again
7. Confirmed software id working as normal.
Post Reply