TENET UHD RB - Failed to open disk

Please post here for issues related to UHD discs
SamuriHL
Posts: 2225
Joined: Mon Jun 14, 2010 5:32 pm

Re: TENET UHD RB - Failed to open disk

Post by SamuriHL »


preserve wrote: Same - sounds like this time Best Buy is doing better than Amazon though! I can only imagine how many copies of this retailers are needing to ship out. I got around to pre-ordering about a month ago, but mine hasn't shipped yet.
Shockingly it says mine is out for delivery this morning. That would be nice. I'd love to watch it tonight. Hopefully the keys get released soon.

Sent from my SM-G975U using Tapatalk

SamuriHL
Posts: 2225
Joined: Mon Jun 14, 2010 5:32 pm

Re: TENET UHD RB - Failed to open disk

Post by SamuriHL »

For read errors make sure you microfiber clean the disc even if it "looks" clean. And if you're still getting read errors after that you can try to use speed control and slow down the drive to 2x.

Sent from my SM-G975U using Tapatalk

sharpie00
Posts: 71
Joined: Mon Apr 03, 2017 11:55 pm

Re: TENET UHD RB - Failed to open disk

Post by sharpie00 »

MuffinMcFluffin wrote:
Wed Dec 16, 2020 4:25 am
Fearless Leader wrote:
Tue Dec 15, 2020 11:24 pm
How recently have you tried it?

I just got Tenet today from Target (in the USA). I ripped it using 15.4 with no errors, which is a surprise because I usually see A/V duplicate frame or overlapping issues.
I was surprised this one showed zero issues. I checked the resulting .mkv file, and it looks golden (no apparent mastering errors or anything).

Perhaps yours has a different key than mine.
I purchased mine at Best Buy, and have tried to rip it on three different occasions.

I downloaded the 15.4 update after the first two times. The second time got close to the end before there was some error, and MakeMKV closed on its own. The first and third time, I got this:

Saving 1 titles into directory E:/Video/Tenet UHD
Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB' occurred while reading '/BDMV/STREAM/00003.m2ts' at offset '34053292032'
Error 'OS error - The specified request is not a valid operation for the target device' occurred while reading '\Device\CdRom0' at offset '34053292032'
Error 'OS error - The specified request is not a valid operation for the target device' occurred while reading '\Device\CdRom0' at offset '34053292032'
Error 'OS error - The specified request is not a valid operation for the target device' occurred while reading '\Device\CdRom0' at offset '34053292032'
Error 'OS error - The specified request is not a valid operation for the target device' occurred while reading '\Device\CdRom0' at offset '34053292032'
Error 'OS error - The specified request is not a valid operation for the target device' occurred while reading '\Device\CdRom0' at offset '34053292032'
Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB' occurred while reading '/BDMV/STREAM/00003.m2ts' at offset '34053292032'
Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB' occurred while reading '/BDMV/STREAM/00003.m2ts' at offset '34053292032'
Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB' occurred while reading '/BDMV/STREAM/00003.m2ts' at offset '34053292032'
Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB' occurred while reading '/BDMV/STREAM/00003.m2ts' at offset '34053292032'
Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB' occurred while reading '/BDMV/STREAM/00003.m2ts' at offset '34053292032'
Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB' occurred while reading '/BDMV/STREAM/00003.m2ts' at offset '34053292032'
Failed to save title 1 to file E:/Video/Tenet UHD/Tenet_t01.mkv
0 titles saved, 1 failed
Getting the same error (different offset). Based on prior experience, I was able to successfully do the 1080p disc and then retried the 4K disc. Still no luck. I thought it may be a bad disc; but from what others are posting, it may be something else.
Fearless Leader
Posts: 13
Joined: Thu Nov 03, 2016 1:48 am

Re: TENET UHD RB - Failed to open disk

Post by Fearless Leader »

MuffinMcFluffin wrote:
Wed Dec 16, 2020 4:25 am
Fearless Leader wrote:
Tue Dec 15, 2020 11:24 pm
How recently have you tried it?

I just got Tenet today from Target (in the USA). I ripped it using 15.4 with no errors, which is a surprise because I usually see A/V duplicate frame or overlapping issues.
I was surprised this one showed zero issues. I checked the resulting .mkv file, and it looks golden (no apparent mastering errors or anything).

Perhaps yours has a different key than mine.
I purchased mine at Best Buy, and have tried to rip it on three different occasions.

I downloaded the 15.4 update after the first two times. The second time got close to the end before there was some error, and MakeMKV closed on its own. The first and third time, I got this:

Saving 1 titles into directory E:/Video/Tenet UHD
Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB' occurred while reading '/BDMV/STREAM/00003.m2ts' at offset '34053292032'
Error 'OS error - The specified request is not a valid operation for the target device' occurred while reading '\Device\CdRom0' at offset '34053292032'
Error 'OS error - The specified request is not a valid operation for the target device' occurred while reading '\Device\CdRom0' at offset '34053292032'
Error 'OS error - The specified request is not a valid operation for the target device' occurred while reading '\Device\CdRom0' at offset '34053292032'
Error 'OS error - The specified request is not a valid operation for the target device' occurred while reading '\Device\CdRom0' at offset '34053292032'
Error 'OS error - The specified request is not a valid operation for the target device' occurred while reading '\Device\CdRom0' at offset '34053292032'
Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB' occurred while reading '/BDMV/STREAM/00003.m2ts' at offset '34053292032'
Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB' occurred while reading '/BDMV/STREAM/00003.m2ts' at offset '34053292032'
Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB' occurred while reading '/BDMV/STREAM/00003.m2ts' at offset '34053292032'
Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB' occurred while reading '/BDMV/STREAM/00003.m2ts' at offset '34053292032'
Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB' occurred while reading '/BDMV/STREAM/00003.m2ts' at offset '34053292032'
Error 'Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB' occurred while reading '/BDMV/STREAM/00003.m2ts' at offset '34053292032'
Failed to save title 1 to file E:/Video/Tenet UHD/Tenet_t01.mkv
0 titles saved, 1 failed
whoa! I've never seen that specific error before. I believe you and hope it starts working for you soon.
hedbert
Posts: 15
Joined: Tue Apr 02, 2019 9:41 pm

Re: TENET UHD RB - Failed to open disk

Post by hedbert »

I still can't open the disk. Nothing yet has changed.
Trout
Posts: 3
Joined: Mon Jan 28, 2019 3:59 pm

Re: TENET UHD RB - Failed to open disk

Post by Trout »

I also am getting the "Scsi error - ILLEGAL REQUEST:INVALID FIELD IN CDB" error. I get about 47gb copied and then the error. Multiple tries, cleaned the disc really well.
MuffinMcFluffin
Posts: 7
Joined: Wed Dec 16, 2020 4:24 am

Re: TENET UHD RB - Failed to open disk

Post by MuffinMcFluffin »

SamuriHL wrote:
Wed Dec 16, 2020 12:15 pm
For read errors make sure you microfiber clean the disc even if it "looks" clean. And if you're still getting read errors after that you can try to use speed control and slow down the drive to 2x.

Sent from my SM-G975U using Tapatalk
Is mine considered a read error? Sorry, I wasn't sure who you were referring to (I guess since mine are I/O, then maybe you were).

And I've never found a disc that I couldn't boil and at least solve some issues that way, but I've never done such a thing with a UHD. If all else fails, do you think that could work? (for those who aren't aware of this method, it's real, tried, and proven)
MuffinMcFluffin
Posts: 7
Joined: Wed Dec 16, 2020 4:24 am

Re: TENET UHD RB - Failed to open disk

Post by MuffinMcFluffin »

So uh... I just got rid of the "OK" prompt, but after boiling my disc on a whim, it ripped successfully!

(again, if you don't know the method, don't do it without knowing what the heck I'm talking about haha... you'll just melt your disc :lol:)
CRHavoc
Posts: 1
Joined: Wed Dec 16, 2020 5:49 pm

Re: TENET UHD RB - Failed to open disk

Post by CRHavoc »

I was having the same issue, where I couldn't load the 4K disk, but I saw the post from Fearless Leader mentioning that the opening the disk worked for him while using version 15.4. I checked my version and mine was 15.0, so I updated and it worked after that.
SamuriHL
Posts: 2225
Joined: Mon Jun 14, 2010 5:32 pm

Re: TENET UHD RB - Failed to open disk

Post by SamuriHL »

Yes I was referring to you for read errors. And boiling your disc?? Holy hell. Uh, well, alrighty then. LOL
ssoss
Posts: 2
Joined: Wed Dec 16, 2020 5:44 pm

Re: TENET UHD RB - Failed to open disk

Post by ssoss »

Can not open disk. Sent dump to email address below.
sharpie00
Posts: 71
Joined: Mon Apr 03, 2017 11:55 pm

Re: TENET UHD RB - Failed to open disk

Post by sharpie00 »

I had to look up "Boiling your disc" and passed. :lol:
MuffinMcFluffin
Posts: 7
Joined: Wed Dec 16, 2020 4:24 am

Re: TENET UHD RB - Failed to open disk

Post by MuffinMcFluffin »

SamuriHL wrote:
Wed Dec 16, 2020 6:01 pm
Yes I was referring to you for read errors. And boiling your disc?? Holy hell. Uh, well, alrighty then. LOL
sharpie00 wrote:
Wed Dec 16, 2020 6:56 pm
I had to look up "Boiling your disc" and passed. :lol:
Suit yourself. :)


Image


Now that I have it on my computer, I don't have any complaints haha.
Last edited by MuffinMcFluffin on Wed Dec 16, 2020 7:46 pm, edited 2 times in total.
SamuriHL
Posts: 2225
Joined: Mon Jun 14, 2010 5:32 pm

Re: TENET UHD RB - Failed to open disk

Post by SamuriHL »

I'm still waiting for fedex. But as soon as it arrives, into the bu40n it goes.

I do have one UHD that I can't read due to a very deep scratch but it's been that way since I got it (one of the harry potter discs). I do have a plan to repair it (just want to get it read once so I can get it on the NAS with the rest of them) but it does not include boiling. :D

EDIT: And just like that their ears must have been burning. Fexed has arrived. :)
SamuriHL
Posts: 2225
Joined: Mon Jun 14, 2010 5:32 pm

Re: TENET UHD RB - Failed to open disk

Post by SamuriHL »

All you guys sending dumps....thanks! Got it ripped and copying up to the NAS. I'll be watching this one tonight for sure.
Post Reply