Some info on issues I encountered upgrading

Discussion of LibreDrive mode, compatible drives and firmwares
Post Reply
jack123
Posts: 12
Joined: Sat Dec 20, 2014 4:35 pm

Some info on issues I encountered upgrading

Post by jack123 » Tue Oct 27, 2020 1:52 pm

I hope this is of use to someone:

I have just upgraded to beta 1.15.3 from an old release
System:
Win7-64 Pro SP1
Intel i7 3.2 (running at 4.0Ghz)
32GB ram
LG BH16NS55 ATA original 1.02 unpatched

Download and installed makemkv 1.15.3 and tested on BD disc
Makemkv reported out of date so got it working the known method
Tried again and stalled _t00 at 6GB (should be 14GB)
it continued as if complete to do the same with _t01 etc.
The converted files did not play - media info reported no video in them
Repeated with no improvement

Downloaded MK drive patch and flasher for 1.05
Save existing 1.02
Tried flashing 1.05 got error 0x08f062900 and flash failed and exited but left 1.02 intact
re-boots no effect tried a couple of times
discovered the register path to makemkv issue but no luck
*By accident ran flash with makemkv open and it flashed* but afterwards
gave "command failed 0x8f062900" - this time makemkv displayed new firmware version
so I immediately rebooted. Dont know what command that refers to - nothing on yahoo I can find

Tried a disc convert and it ran fine - until writing to a thumb drive from another file during which
make mkv paused entirely until the copy ended and makemkv then re-started (so much for
microsoft multi-tasking)

I'm now seeing transfer speeds up to 34.7 M/s varying depending on progress.
Next task is to add AC3 conversion (some readme files would be nice guys - I spotted the tgz by accident)

Many thanks as always to all contributors - I really hate having to wait out copyright notices etc on products I've
paid dearly for!

Billycar11
Posts: 1293
Joined: Sun Aug 24, 2014 5:49 am

Re: -

Post by Billycar11 » Sat Nov 28, 2020 11:49 am

GrantKib wrote:
Sat Nov 28, 2020 10:27 am
ok guys i contact the guys in CPUID for the Foxconn sensors issue
now they asked me how would they can contact the guy on charge for this stuff in Foxconn i PMed Lord Trident but got no asnwer so far
so who can provide this kind of info from Foxconn ???
What are you talking about I don't think foxcon has anything to do with these drives or cpuid
Buy a UHD drive from the guide and how to videos maker: https://www.makemkv.com/forum/viewtopic ... 20&t=17831
Ultimate UHD Drives Flashing Guide Updated 2020: https://www.makemkv.com/forum/viewtopic ... 16&t=19634

Woodstock
Posts: 7797
Joined: Sun Jul 24, 2011 11:21 pm

Re: Some info on issues I encountered upgrading

Post by Woodstock » Sat Nov 28, 2020 4:11 pm

Don't worry, the message you were replying to was a spam message, and the spammer is gone now.
How to aid in finding the answer to your problem: https://www.makemkv.com/faq/item/8

Post Reply