WH16NS40 Flasher

Discussion of LibreDrive mode, compatible drives and firmwares
Post Reply
avenger09123
Posts: 10
Joined: Tue Jun 18, 2019 2:35 am

WH16NS40 Flasher

Post by avenger09123 » Wed Jul 31, 2019 2:22 am

For anyone looking - I read through pages and pages of forum posts to bring you this one simple and easily understood set of paragraphs - I bought an LG WH16NS40 with 1.04 firmware on it, and rented two 4k blu-rays. The drive would not even recognize the disc was present after spinning up.
Long story short -

Download the zip below - open the flasher tool. Select the folder with the arrow in it and select the firmware that says 3.10 in the title. Flash it. Restart. Then flash the second firmware in it - which has the correct model name in it and is UHD friendly courtesy of our genius friends here in the forums. Thank you, you all have helped greatly.

https://drive.google.com/file/d/1hrKH-o ... sp=sharing

SamuriHL
Posts: 861
Joined: Mon Jun 14, 2010 5:32 pm

Re: WH16NS40 Flasher

Post by SamuriHL » Wed Jul 31, 2019 2:56 am

This post is almost guaranteed to cause problems I'm afraid. This does not give people enough information to SAFELY flash an NS40 drive. Why? Because not all NS40 drives are made the same. People MUST check the sticker on the drive and can ONLY flash drives with the NS50 SVC code on the sticker. Meaning drives manufactured after late 2015. If they attempt to flash a non-NS50 SVC code NS40 drive, they will brick it in a way that's a massive pain in the ass to fix. So while your instructions are great for those with the proper drive, far too many people don't heed the warning to check the sticker on the drive before blindly flashing and end up with a bricked drive. Therefore, I'm posting this to warn people that these instructions will work great for the proper drive, but, be careful.

avenger09123
Posts: 10
Joined: Tue Jun 18, 2019 2:35 am

Re: WH16NS40 Flasher

Post by avenger09123 » Fri Aug 02, 2019 3:39 am

SamuriHL wrote:
Wed Jul 31, 2019 2:56 am
This post is almost guaranteed to cause problems I'm afraid. This does not give people enough information to SAFELY flash an NS40 drive. Why? Because not all NS40 drives are made the same. People MUST check the sticker on the drive and can ONLY flash drives with the NS50 SVC code on the sticker. Meaning drives manufactured after late 2015. If they attempt to flash a non-NS50 SVC code NS40 drive, they will brick it in a way that's a massive pain in the ass to fix. So while your instructions are great for those with the proper drive, far too many people don't heed the warning to check the sticker on the drive before blindly flashing and end up with a bricked drive. Therefore, I'm posting this to warn people that these instructions will work great for the proper drive, but, be careful.
Okay good point - this is for Feb 2019 and newer drives that come with 1.04 firmware on them.

It needs to be updated in the latest -mk package because the label on the folder is literally "WH16NS40-NS50" and it only contains one bin file with the same label. I don't know anyone who would not assume it would fit both service codes without doing a bunch of reading as well. I most certainly didn't get that impression with my reading, although it wasn't what I was looking for so I could have missed it.

Lets add to the fact that the latest -mk firmware now contains a firmware for only 6 months of a drive being out, and not the last 4 years of the same drive in an earlier revision? Sounds odd to the common sense test to me...

aa0nn
Posts: 1
Joined: Sun Feb 15, 2015 12:15 am

Re: WH16NS40 Flasher

Post by aa0nn » Fri Aug 02, 2019 4:46 am

I just received my WH16NS40 optical drive from Amazon yesterday, manufactured Feb 2019, Service code NS50, but the firmware version is 1.03. The original post indicated this flasher program will work only with 1.04. Is there a solution for the version I have? Thank you.

Billycar11
Posts: 426
Joined: Sun Aug 24, 2014 5:49 am

Re: WH16NS40 Flasher

Post by Billycar11 » Fri Aug 02, 2019 5:25 am

Pinned on top of uhd drive section I have videos and everything

avenger09123
Posts: 10
Joined: Tue Jun 18, 2019 2:35 am

Re: WH16NS40 Flasher

Post by avenger09123 » Tue Aug 13, 2019 1:55 am

Billycar11 wrote:
Fri Aug 02, 2019 5:25 am
Pinned on top of uhd drive section I have videos and everything
+1 to this. In theory - according to everything I have read, the unlocked flasher was built to handle the protections that showed up in 1.03, though that may have never been fully implemented.

That being said - the videos are a great help. If you have questions this is a great community to answer them.

SamuriHL
Posts: 861
Joined: Mon Jun 14, 2010 5:32 pm

Re: WH16NS40 Flasher

Post by SamuriHL » Tue Aug 13, 2019 2:10 am

avenger09123 wrote:
Tue Aug 13, 2019 1:55 am
+1 to this. In theory - according to everything I have read, the unlocked flasher was built to handle the protections that showed up in 1.03, though that may have never been fully implemented.
I'm not sure what you read or think you read, but, this is very wrong. The patched flashers have nothing to do with getting around the protections in these new firmware versions. It's the MK firmware that Mike creates that do so. The latest firmware versions for several drives disables the normal "Downgrade Enabled" firmware that we've all been using. They've added additional protection to also remove dosflash compatibility. Mike patches those firmware versions to create MK versions that allow LibreDrive to work. And they restore the ability to downgrade should you desire the ability to do so. That's the magic sauce, as it were. The patched flashers simply allow flashing these firmware to various drives.

Post Reply